Mr. Thomas Yoon
+82-10-5380-0313
e-CAM131_CUTX2 - 4K MIPI NVIDIA® Jetson™ TX2/TX1 Camera Board
e-CAM131_CUTX2 - 13MP Jetson™ TX2/TX1 camera board is a 4-lane MIPI CSI-2 camera solution for NVIDIA® Jetson™ TX2/TX1 developer kit. This camera is based on 1/3.2" AR1335 CMOS image sensor with advanced 1.1µm pixel BSI technology from onsemi® and an integrated high-performance image signal processor (ISP) that performs all the Auto functions (Auto White Balance, Auto Exposure control). It has S-mount (M12) lens holder which allows customers to choose and use the lens according to their requirement.
This camera can be directly connected to camera connector(J22) on the NVIDIA® Jetson™ TX2/TX1 developer Kit. e-CAM131_CUTX2 is exposed as a standard V4L2 device and customers can use the V4L2 APIs to access this camera and control the same.
- Houses e-CAM131_CUMI1335_MOD - 13.0 MP Camera Module with S-mount lens holder
- High-speed 4-lane MIPI CSI-2 interface to connect with the CPU
- Plugs in to NVIDIA® Jetson™ TX2 and TX1 Developer Kit
- Maximum Image Transfer Rate
-
Resolutions Uncompressed YUV422 VGA 120 fps HD (720p) 72 fps Full HD (1080p) 72 fps 4K Ultra HD (3840x2160) 30 fps 4K Cinema (4096 x 2160) 28 fps 13MP (4192 x 3120) 19 fps - Operating Voltage - 5V +/- 5%, Current - 245mA
- Operating Temperature Range : -30°C to +70°C
- Power Consumption:
- Max : 1.22W
- Min : 0.74W
- Linux camera driver (V4L2) for 13.0 MP MIPI CSI-2 camera module
- Sample application for image capture & Preview
- Gstreamer-1.0 support for video recording and network streaming
- Board size( L x W x H): 75.03mm x 40.18mm x 25.6mm(without Lens)
- Board Weight - 28 Grams (with lens)
- RoHS compliant
- Lightweight, versatile, and portable two-board solution
- Launched on:
Sensor:1/3.2" Optical form factor AR1335 CMOS Image sensor
Focus Type:Fixed focus
Resolution:13.0 MP
Pixel size:1.1 µm x1.1 µm
Sensor Active Area:4208(H) x 3120(V)
Responsivity:4700 e-/lux-sec
SNR:37 dB
Dynamic Range:69 dB
Output Format:Uncompressed UYVY streaming & Compressed MJPEG streaming
Shutter type:Electronic Rolling Shutter
Holder:S-Mount
ISP:External ISP
Array Size:4208x3120
DFOV : 13M - 82°, 4K/1080p/720p - 53°, VGA - 67°(with the lens provided by e-con)
Linux camera driver:
Full-fledged Linux camera driver for MIPI CSI-2 camera module. The driver supports e-con's e-CAM131_CUTX2 on Jetson developer kit. The camera driver source code can be ported to any NVIDIA® Jetson™ TX2 and TX1 platform and even to support the secondary MIPI CSI-2 interface of TX2 and TX1
- Supported Jetpack & L4T Version
-
- NVIDIA® Jetson™ TX2 - JetPack 3.3 L4T28.2.1
- NVIDIA® Jetson™ TX1 - JetPack 3.3 L4T28.2
- V4L2 Linux driver for MIPI CSI-2 camera module
-
- Video preview
- Still Image capture
- Camera controls via IOCTLs
- Sample application with source Code for Linux:
-
- Video Preview
- Still Image capture at selected resolutions
- Camera Controls
-
- Brightness
- Contrast
- Saturation
- White Balance (both manual and automatic)
- Gamma
- Gain
- Horizontal Flip
- Vertical Flip
- Sharpness
- Exposure (Manual, Automatic and ROI based Automatic)
- Focus (Manual, Centre based Trigger, ROI Based Trigger)
- i-HDR
- Digital Zoom
- Pan
- Tilt
- Note: Seperate software delivery package for NVIDIA® Jetson TX2 and TX1.
Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
Kit Contents:
- e-CAM131_CUMI1335_MOD - 13 MP 4K camera module with lens
- Adaptor board
- SD Card
- Linux Driver & Sample Application
- Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
e-CAM131_CUTX2 Documents
Employee Login
