Mr. Thomas Yoon
+82-10-5380-0313
e-CAM80_CUONX is an 8MP ultra-lowlight MIPI CSI-2 camera based on SONY STARVIS™ IMX415 CMOS image sensor. This ultra-low light camera provides high-quality imaging even in both visible and low-lighting conditions.
It can be directly connected with the NVIDIA® Jetson Orin™ NX developer kit and it uses NVIDIA® on-board Image Signal Processor (ISP) which is fine-tuned to perform all the image processing.
This Jetson Orin™ NX camera evaluations are as easy as plug and play with GStreamer support for streaming and recording functionalities. Camera support with NVIDIA® Jetson Orin™ NX allows customers to run NVIDIA DeepStream SDK, which makes it easier to build their edge-based intelligent video analytics (IVA) applications.
Refer
Datasheet for complete frame rate details.
- Key features:
-
- Frame Rate:
- Full HD @ 70fps & 4K @ 44fps
Datasheet for complete frame rate details.
- Output Format: RAW Bayer 10/12-bit
- Standard M12 lens holder for use with customized optics or lenses for various applications
- Lightweight, versatile, and portable design
- Frame Rate:
- Interface:
-
- Interface: MIPI CSI-2
- Connector: FPC flex cable
- Cable Length: 15cm
- Module features:
-
- Sensor: IMX415 from Sony® Starvis
- Focus Type: Fixed focus
- Sensor Resolution: 8MP
- Chroma: Color
- Shutter Type: Electronic Rolling Shutter
- Optical Format: 1/2.8"
- Output Format: RAW Bayer 10/12-bit
- Pixel Size: 1.45 μm x1.45 μm
- Sensor Active Area: 3864H x 2192V
- Array Size: 3864H x 2192V
- Holder: M12 (S-Mount)
- FOV: 131° (D), 113° (H), 61° (V) (with the lens provided by e-con)
- Electrical & Mechanical:
-
- Operating Voltage: 3.3V +/- 5%
- Operating Temperature Range: -30°C to +70°C
- Typical power consumption: TBD
- Size in mm (l x b x h): 30mm x 30mm
- Miscellaneous:
-
- Compliance: RoHS
- Launched on:
Linux camera driver:
The e-CAM80_CUONX is a 2-lane and 4-lane MIPI CSI-2 camera and it requires a custom camera driver for NVIDIA® Jetson Orin Nano™ / NVIDIA® Jetson Orin™ NX Developer Kit. e-con Systems™ provides the camera driver along with the camera board.
- Supported Jetpack & L4T Version
-
- NVIDIA® Jetson™ ORIN NX / Orin nano - JetPack 6.0.0 L4T36.3.0
- V4L2 Linux driver for MIPI CSI-2 camera module:
-
- Video preview
- Still Image capture
- Camera controls via IOCTLs
- Sample application with source Code for Linux:
-
- Video Preview
- Still Image capture at selected resolutions
- Camera Controls:
-
- Exposure (both manual and automatic)
- Sensor Gain
- Exposure Time
- Frame Rate
- Sensor Mode Index
- Please contact camerasolutions@e-consystems.com for any customization or porting of camera driver to your requirements.
- e-CAM83_CUMI415_MOD - 8MP MIPI Camera Module with lens
- Adaptor board
- Flex Cable (15 cm)
- Linux Driver & Sample Application
- Please contact camerasolutions@e-consystems.com for any customization or porting of camera driver to your requirements.
Employee Login
