NileCAM210 is a 2 MP low-light camera module based on an IMX462 sensor from Sony®. It comes with a 1/2.8" optical form factor and 2.9 μm pixel size which ensure low light sensitivity in night vision applications.
This low-light camera module uses GMSL2 interface to stream video data of FHD at 60 fps, that too with low latency. It also supports Wide Dynamic Range (WDR) to improve overall imaging performance.
Refer Datasheet for complete frame rate details.
- Key features:
-
- Frame Rate - Streams Full HD @ 60fps and HD @ 60fps
Refer Datasheet for complete frame rate details. - Output format: RAW 12-bit
- S-mount lens holder for flexibility to choose a lens as per application requirements
- Lightweight, versatile, and portable design
- Frame Rate - Streams Full HD @ 60fps and HD @ 60fps
- Interface:
-
- Interface: GMSL2
- Connector: FAKRA connector
- Cable Length: 15m
- Sensor features:
-
- Sensor: IMX462 sensor from SONY® Starvis
- Focus Type: Fixed focus
- Sensor Resolution: 2MP
- Chroma: Color
- Shutter Type: Electronic Rolling Shutter
- Optical Format: 1/2.8"
- Output Format: RAW 12-bit
- Pixel Size: 2.9μm x 2.9μm
- Sensor Active Area: 1945H x 1097V
- Array Size: 1945H x 1097V
- G Sensitivity: 2.376V at 12-bit HCG mode, 0.921V at 12-bit LCG mode
- Holder: M12 (S-Mount)
- FOV: 132°(D), 113°(H), 61°(V) (with the lens provided by e-con)
- Electrical & Mechanical:
-
- Operating Voltage: 5 to 15V with +/- 5% tolerance
- Operating Temperature Range: -30°C to 70°C
- Typical power consumption: 7.488W
- Size in mm (l x b) : 30 x 30 mm
- Miscellaneous:
-
- Compliance: RoHS
- Launched on:
Part No | Supported Platforms |
Sample Price (1 Unit) |
Purchase |
---|---|---|---|
NileCAM210_CUQRB5
Kit Contents
|
Qualcomm® Robotics RB5 Vision Kit | ||
NilecAM210_CUOAGX
Kit Contents
|
NVIDIA® Jetson AGX Orin™ / AGX Xavier™ Dev Kit |
- |
NileCAM210 - Customization for other Application Processor platforms:
e-con Systems® provides camera driver development, customization, and porting services for NileCAM210 on any application platform as per customer requirements.
NileCAM210 - Customization
e-con provides customization, development and porting services for the following requirements:
- IP rated (IP67) enclosure and IP rated (IP67) cables for rugged applications.
- Length of the co-axial cable
- Change of lens to meet your FOV and other requirements
- Support for other NVIDIA® Jetson® platforms as well as carrier boards from other vendors built using NVIDIA platforms
- Support for other processor platforms
- Camera and features customization based on specific requirements. Please contact camerasolutions@e-consystems.com for customization requirements.