Mr. Thomas Yoon
+82-10-5380-0313
e-CAM130_CURB - Raspberry Pi 4K Camera
e-CAM130_CURB, is a high performance, 13 MP fixed focus 4K camera solution for Raspberry Pi 4. The e-CAM130_CURB camera can be directly connected to the MIPI CSI-2 interface on the Raspberry Pi 4 development kit. This Raspberry Pi High Resolution camera is based on 1/3.2” AR1335 CMOS image sensor from onsemi® and has a dedicated, high-performance Image Signal Processor (ISP) that performs all the Auto functions like auto white balance, auto exposure control in addition to complete image signal processing pipeline that provides best-in-class images and video. Read More »
Key Features of Raspberry Pi 4 Camera:
- Houses e-CAM137A_CUMI1335_MOD - 13.0 MP Camera Module with S-mount lens holder
- High-speed MIPI CSI-2 interface to connect with the CPU
- Plugs in to Raspberry Pi 4 kit
- Maximum Image Transfer Rate
-
Resolutions UYVY VGA (640 x 480) 110 fps HD (1280 x 720) 72 fps Full HD (1920 x 1080) 60 fps* 4K (3840 x 2160) 15 fps* 4K CINEMA (4096 x 2160) 14 fps* 13MP (4208 x 3120) 9 fps* Custom ROI >300 fps** - * - All framerates mentioned above are the framerate at which Raspberry Pi 4 captures the frames over 2-lane MIPI-CSI2 interface. Framerates would vary when the frames are rendered on the display.
- ** - Not supported by default. Requires firmware customization for higher framerates with custom ROI resolutions.
- Output Format - UYVY
- Operating Temperature Range : -30° to 70° C
- Board Weight:
- 18.5 Grams (with Lens and FFC Cable)
- 12.0 Grams (without Lens and FFC Cable)
- Recording(HW accelerated encoding) - 1080@30 fps
- Yocto build support (dunfell)
- Raspbian OS support (Buster and Bullseye)
- Linux camera driver (V4L2) for 13.0 MP MIPI CSI-2 camera module
- Sample application for image capture & Preview
- Gstreamer-1.0 support for video streaming
- Lightweight, versatile, and portable multi-board solution
- Adaptor board size in mm (l x b): 30 x 30 (Height depends on the lens)
- FPC Cable Length: 15 cm
- RoHS compliant
- Launched on:
Camera Module Features:
Sensor:AR1335 from onsemi®
Sensor Resolution and Optical Format:13MP CMOS Image Sensor. 1/3.2" Optical format
Sensor Type:13MP CMOS Electronic Rolling Shutter Sensor
Image Signal Processor:On-board high performance ISP
Output Format:Uncompressed UYVY format
Sensor Features:
Pixel size:1.1μm x 1.1μm pixel with BSI technology
Sensor Active Area:4208 (H) x 3120 (V)
Responsivity:4700 e-/lux-sec
SNR:37 dB
Dynamic Range:69 dB
Shutter type:Electronic Rolling Shutter
Focus Type:Fixed focus / Auto focus*
Array Size:4208x3120
FOV: 110°(D), 86°(H), 64°(V) (with the lens provided by e-con)
* - Liquid lens option is available for this product and can be provided on request
The e-CAM130_CURB is a MIPI 4-lane camera and it requires a custom camera driver for Raspberry Pi 4. e-con Systems™ provides the camera driver along with the camera board.
- V4L2 Linux driver for MIPI CSI-2 camera module
-
- Video preview
- Still Image capture
- Camera controls via IOCTLs
- Sample application with source Code for Linux:
-
- Video Preview
- Still Image capture at selected resolutions
- yocto build support with econ camera driver and user space application integrated
- Camera Controls
-
- Brightness
- Contrast
- Saturation
- White Balance (both manual and automatic)
- Gamma
- Gain
- Horizontal Flip
- Vertical Flip
- Sharpness
- Exposure (Manual, Automatic)
- Digital Zoom
Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
Kit Contents for Raspberry Pi 4 Camera:
- Hardware:
-
- e-CAM130_CURB - 13.0 MP MIPI Camera board (contains the e-CAM137A_CUMI1335_MOD camera module, adaptor board and a FFC cable)
- Software:
-
- Linux:
-
- Prebuilt images for out of the box evaluation
- V4L2 - Linux driver source code
- prebuild yocto and Raspbian images for out of the box Evalution
e-CAM130_CURB Documents
Promotional Sample Price
Excluding Shipment Charges
Employee Login
