STURDeCAM34 is a 3MP GMSL2™ camera module based on AR0341AT CMOS image sensor. This module stands out with its remarkable features, including super-exposure pixel technology that provides up to 140 dB high dynamic range (HDR) with LED flicker mitigation (LFM) operation. This super-exposure pixel technology eliminates the need for auto exposure control operations and also minimizes latency in sensing and viewing camera applications, making it highly suitable for Advanced Driver Assistance Systems (ADAS) and other critical applications.
The STURDeCAM34 camera module also comes equipped with an on-board high-performance ISP, further enhancing image processing capabilities. With e-con Systems' patented hot-pluggable GMSL support, you can connect or disconnect the camera without system downtime or disruption. STURDeCAM34 offers versatile interface options, providing seamless integration capabilities for a wide range of applications.
Refer Datasheet for complete frame rate details.
- Key features:
-
- Frame Rate:
- 3MP @ 30 fps
- Output format: UYVY
- S-mount IP69K compliant lens focused and glued at factory
- Lightweight, versatile, and portable design
- Small form factor
- Frame Rate:
- Interface:
-
- Interface: GMSL2™
- Connector: FAKRA connector
- Cable Length: upto 15m
- Sensor features:
-
- Sensor: AR0341 from onsemi®
- Focus Type: Fixed focus
- Sensor Resolution: 3MP
- Chroma: Color
- Shutter Type: Electronic Rolling Shutter
- Optical Format: 1/3.6"
- Output Format: RAW Bayer
- Pixel Size: 2.1μm x 2.1μm
- Sensor Active Area: 1920 (H) x 1536 (V)
- Array Size: 1920 (H) x 1536 (V)
- Dynamic Range: upto 150dB
- Holder: M12 (S-Mount)
- FOV: 64.62° (H), 51.28° (V), 83.5° (D)
- Electrical & Mechanical:
-
- Operating Voltage: 5 to 15V with +/- 5% tolerance
- Operating Temperature Range: -40°C to 85°C
- Typical power consumption: 2.192 W
- Size in mm (l x b): 25 x 25 mm (With enclosure)
- Standards and Compliance:
-
- FCC Class-B, RoHS
- For application specific standards, refer here » refer here»
- IP69K Certified (Dust tight with protection against close-range high pressure, high temperature spray downs)
- Launched on:
* - This option is not available by default. Please contact camerasolutions@e-consystems.com to enable this feature.
Emission standards:
S.No | Certification | Test Specifications |
---|---|---|
1 | FCC Part 15, Subpart B, Class-B |
Test done according to Federal Communications Commission's (FCC) regulations for electronic devices under subpart B |
2 | CE & ROHS |
Application Specific Standards:
S.No | TARGETED APPLICATION | RADIATED EMISSION | RADIATED IMMUNITY | ENVIRONMENTAL |
---|---|---|---|---|
1 | Delivery robots |
CISPR-32 |
EN 61000-4-3:2020 |
ISO 16750-4
ISO 16750-3 |
2 | Warehouse robots | |||
3 | ADAS |
CISPR-25-6.4 |
ISO 11452-2
ISO 11452-4 |
|
4 | Autonomous vehicle | |||
5 | Road vehicles | |||
6 | Remote driving | |||
7 | Earth moving and building construction machinery |
ISO 14982 |
ISO 13766-1 |
|
8 | Agriculture and forest machinery |
ISO 13766-1 |
ISO14982 |
Note: The product has been qualified for above standards with simulated control unit. Final Certification to be performed with targeted system & application.
Part No | Kit Contents |
Sample Price (1 Unit) |
Purchase |
---|---|---|---|
STURDeCAM34_CUOAGX_CXLC_AT_1H01R1 |
|
||
STURDeCAM34_CXLC_AT_1H01R1 |
|
USD 399 | |
STURDeCAM34_CXLW_AT_1H03R1 |
|
USD 349 |
Please contact camerasolutions@e-consystems.com for information about the customization options, including 15-meter cable and Jetson AGX Xavier platform support.
Note: The new deserializer board with this kit is a must for the camera. Old deserializer boards are not compatible.
* - The IP69K rating is applicable only when the customer utilizes the appropriate IP69K validated GMSL cable with this specific part number.
STURDeCAM34 - Customization for other Application Processor platforms:
e-con Systems® provides camera driver development, customization and porting services for STURDeCAM34 on any application platform as per customer requirements.
STURDeCAM34 - Customization:
e-con provides customization for the following requirements:
- IP rated (IP69K) enclosure and IP rated (IP69K) cables for rugged applications.
- Length of the co-axial cable
- Change of lens to meet your FOV and other requirements
- Support for other NVIDIA® Jetson™ platforms as well as carrier boards from other vendors built using NVIDIA platforms
- Support for other processor platforms
- Camera and feature customization based on specific requirements. Please contact camerasolutions@e-consystems.com for customization requirements.